0
WD-1
The WD-1 water detector can be used in two ways. Firstly, it can be used to simply monitor the floor or a space for the presence of water... like a leak detector. The other way to use the WC-1 is as a water verification monitor. Used in this way, the water detector is placed where runoff will accumulate (or where water is introduced into the growing medium). Each output (solenoid valve or pump) on the Aqua-x can be "assigned" to a specific WD-1. Each time the solenoid valve or pump assigned to the WD-1 is activated by the Aqua-X, the WD-1 must detect water within an adjustable delay. If water is not detected (pump or solenoid valve failure), the Aqua-X will send an alert to the user to notify "irrigation failure". Up to 25 WD-1s can be connected to a single Aqua-x.
*Use two water sensors (WD-1/2) to activate the new automatic refill function on the Aqua-X Pro. One water sensor will be positioned at the bottom of the nutrient tank and another at the top of the tank. When the liquid level drops below the lower sensor, the Aqua-X Pro will activate a solenoid valve or pump and the tank will fill up to the upper sensor.
.jpg)