{"title":"Tent-X","description":"\u003cp\u003eTent-X brings Trolmaster environmental control to compact spaces. Climate and substrate sensors, lighting and humidity management for fully controlled grow rooms.\u003c\/p\u003e","products":[{"product_id":"tcs-1","title":"TCS-1","description":"\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003eProduct description\u003c\/h2\u003e\n\n\u003cp\u003eThe Tent-X (TCS-1) is a professional-grade, modular environmental and irrigation control system designed for single-zone grow tents. Thanks to the controller’s compact hydroponic capabilities, users can efficiently control their tent’s environmental parameters and irrigation schedule with a single control system.\u003c\/p\u003e\n\n\u003cp\u003eIt comes with a 3-in-1 temperature, humidity and light sensor, the MBS-TH. Users can daisy-chain the MBS-TH sensor with the CO2 sensor (MBS-S8), the full-spectrum quantum sensor (MBS-PAR) and the smoke and water detectors on the TCS-1’s SENSOR port.\u003c\/p\u003e\n\n\u003cp\u003eUsers can also connect an AMP-3 sensor board to the Tent-X and connect the water content sensors (WCS-1\/2) or the WD-1 water detector to the sensor board. In addition, the TCS-1 supports up to four DS-type plug-in control modules, allowing you to connect devices that control the environment and irrigation.\u003c\/p\u003e\n\n\u003cp\u003eThe TCS-1 is the brain that brings all your climate control and irrigation devices together as one, allowing them to work together to create the optimum growing environment for your plants.\u003c\/p\u003e\n\n\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003eKey features\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003eCompact hydroponic control system for grow tent lighting \/ climate \/ irrigation\u003c\/li\u003e\n\n  \u003cli\u003eModular, fully customisable design\u003c\/li\u003e\n\n  \u003cli\u003eFull device control capability\u003c\/li\u003e\n\n  \u003cli\u003eHistory graph\u003c\/li\u003e\n\n  \u003cli\u003eCompatible with the free TrolMaster app\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003ePackage contents\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003e1x Tent-X controller\u003c\/li\u003e\n\n  \u003cli\u003e1x 3-in-1 temp \/ humidity \/ light sensor\u003c\/li\u003e\n\n  \u003cli\u003e1x RJ12 cable set for lighting connection\u003c\/li\u003e\n\n  \u003cli\u003e1x RJ12 T-splitter\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003eInput voltage: 100–240 VAC, 50\/60 Hz\u003c\/li\u003e\n\n  \u003cli\u003eMaximum number of luminaires: 256 × 2\u003c\/li\u003e\n\n  \u003cli\u003eSensor capacity:\u003c\/li\u003e\n\n  \u003cli\u003eMBS-TH (temp\/humidity\/light): max. 1 pc per set\u003c\/li\u003e\n\n  \u003cli\u003eMBS-S8 (CO2): max. 1 pc per set\u003c\/li\u003e\n\n  \u003cli\u003eMBS-PAR (PPFD): max. 1 pc per set\u003c\/li\u003e\n\n  \u003cli\u003eMBS-SD (smoke detector): max. 1 pc per set\u003c\/li\u003e\n\n  \u003cli\u003eAMP-3 (pH \/ EC \/ temp): max. 1 pc per set\u003c\/li\u003e\n\n  \u003cli\u003eWCS-1 \/ 2 (WC \/ EC \/ temp): max. 1 pc per set\u003c\/li\u003e\n\n  \u003cli\u003eWD-1 (water detector): max. 2 pcs per set\u003c\/li\u003e\n\n  \u003cli\u003eDevice capacity:\u003c\/li\u003e\n\n  \u003cli\u003eTemperature device stations: max. 2 pcs per set\u003c\/li\u003e\n\n  \u003cli\u003eHumidity device stations: max. 2 pcs per set\u003c\/li\u003e\n\n  \u003cli\u003eCO2 device stations: max. 2 pcs per set\u003c\/li\u003e\n\n  \u003cli\u003eTimer device stations: max. 4 pcs per set\u003c\/li\u003e\n\n  \u003cli\u003eEC fan control adaptor: max. 2 pcs per set\u003c\/li\u003e\n\n\u003c\/ul\u003e","brand":"Future of Grow","offers":[{"title":"Default Title","offer_id":55081608937797,"sku":"TCS-1","price":291.97,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0899\/2863\/0597\/files\/tcs-1-default-future-of-grow-4650282.webp?v=1752033943"},{"product_id":"efc-1","title":"EFC-1","description":"\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003eProduct description\u003c\/h2\u003e\n\n\u003cp\u003eThe EFC-1 is specially designed for use with the Tent-X control system to control the variable speed of an EC fan. The output mode of the EFC-1 must be set to PWM or 0–10 V to control the EC fan.\u003c\/p\u003e\n\n\u003cp\u003eEach Tent-X can connect one EFC-1 for exhaust (F1) and one for intake (F2). Each exhaust (F1) \/ intake (F2) line requires its own EFC-1.\u003c\/p\u003e\n\n\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003eKey features\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003eLCD display for PWM \/ 0–10 V mode addressing\u003c\/li\u003e\n\n  \u003cli\u003eSeamless connection with the Tent-X main controller and the EC fan\u003c\/li\u003e\n\n  \u003cli\u003eReady to use\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003ePackage contents\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003e1x EC fan control adaptor\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003eInput voltage: 12 V\u003c\/li\u003e\n\n  \u003cli\u003eMaximum output voltage: 0–10 V, PWM 50 mA\u003c\/li\u003e\n\n  \u003cli\u003eMaximum current: 0.1 A\u003c\/li\u003e\n\n  \u003cli\u003eOperating environment: temperature 32–122 °F (0–50 °C), humidity ≤90%\u003c\/li\u003e\n\n\u003c\/ul\u003e","brand":"Future of Grow","offers":[{"title":"Default Title","offer_id":55081609003333,"sku":"EFC-1","price":57.61,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0899\/2863\/0597\/files\/efc-1-default-future-of-grow-9284677.webp?v=1753119966"},{"product_id":"lma-11","title":"LMA-11","description":"\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003eProduct description\u003c\/h2\u003e\n\n\u003cp\u003eTrolMaster’s Hydro-x system can control most of the supplemental grow lights sold today. Most luminaire manufacturers offer the option of controlling their lighting systems using what is known as extra-low-voltage control. This extra-low-voltage control can take many forms and communication protocols. TrolMaster makes several types of lighting adaptor (LMA units) that allow the Hydro-x to control lights using their extra-low-voltage control option.\u003c\/p\u003e\n\n\u003cp\u003eThis P lighting control adaptor (LMA-11) is specially designed to control P ballasts.\u003c\/p\u003e\n\n\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003eKey features\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003eLED power indicator\u003c\/li\u003e\n\n  \u003cli\u003eConverts digital signals to analogue signals\u003c\/li\u003e\n\n  \u003cli\u003eSeamless connection with Hydro-X via an RJ12 cable\u003c\/li\u003e\n\n  \u003cli\u003eReady to use\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003ePackage contents\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003e1 x P lighting control adaptor (LMA-11)\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003e12 VDC\u003c\/li\u003e\n\n  \u003cli\u003e0.1 A\u003c\/li\u003e\n\n  \u003cli\u003e32–122 °F, \u0026lt;90% RH\u003c\/li\u003e\n\n\u003c\/ul\u003e","brand":"Future of Grow","offers":[{"title":"Default Title","offer_id":55081609199941,"sku":"LMA-11","price":56.73,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0899\/2863\/0597\/files\/c1c26a_bdcd9ea76c344c708582ac7a2000d7e7_mv2_kdufvt.webp?v=1753112205"},{"product_id":"lma-t","title":"LMA-T","description":"\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003eProduct description\u003c\/h2\u003e\n\n\u003cp\u003eTrolMaster’s Hydro-x system can control most of the supplemental grow lights sold today. Most luminaire manufacturers offer the option of controlling their lighting systems using what is known as extra-low-voltage control. This extra-low-voltage control can take many forms and communication protocols. TrolMaster makes several types of lighting adaptor (LMA units) that allow the Hydro-x to control lights using their extra-low-voltage control option.\u003c\/p\u003e\n\n\u003cp\u003eThe LMA-T works specifically with ThinkGrow LED systems to provide two-channel control, allowing separate control of the full-spectrum and secondary red output levels on ThinkGrow LEDs.\u003c\/p\u003e\n\n\u003cp\u003eThe LMA-T simply connects to the Line 1 and Line 2 lighting control ports on the HCS-1. Once connected, the user can set individual on and off times as well as dimming settings for the full-spectrum LEDs and for the secondary red LEDs.\u003c\/p\u003e\n\n\u003cp\u003eThe LMA-T is then connected to the RJ-type lighting control cables, with each LED connected to the controller in a daisy-chain configuration using plug-and-play connections.\u003c\/p\u003e\n\n\u003cp\u003eOne adaptor can manage up to 256 ThinkGrow LEDs.\u003c\/p\u003e\n\n\u003cp\u003e* RJ12 to waterproof connector converter cable included.\u003c\/p\u003e\n\n\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003eKey features\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003eLED indicator\u003c\/li\u003e\n\n  \u003cli\u003ePlug \u0026amp; Play\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003ePackage contents\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003e1x LMA-T\u003c\/li\u003e\n\n  \u003cli\u003e1x RJ12 to custom waterproof connector\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003eOutput voltage: 0–11.5 V\u003c\/li\u003e\n\n  \u003cli\u003eMaximum current: 0.2 A\u003c\/li\u003e\n\n  \u003cli\u003eOperating environment: temperature 32–122 °F, humidity ≤90%\u003c\/li\u003e\n\n  \u003cli\u003ePackage dimensions: 156 mm (L) × 83 mm (W) × 30 mm (H)\u003c\/li\u003e\n\n\u003c\/ul\u003e","brand":"Future of Grow","offers":[{"title":"Default Title","offer_id":55081609789765,"sku":"LMA-T","price":88.35,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0899\/2863\/0597\/files\/c1c26a_3177d50a1eba4475beaf01505964a9a3_mv2_nkzvxx.webp?v=1751965756"},{"product_id":"lma-12","title":"LMA-12","description":"\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003eProduct description\u003c\/h2\u003e\n\n\u003cp\u003eTrolMaster’s Hydro-x system can control most of the supplemental grow lights sold today. Most luminaire manufacturers offer the option of controlling their lighting systems using what is known as extra-low-voltage control. This extra-low-voltage control can take many forms and communication protocols. TrolMaster makes several types of lighting adaptor (LMA units) that allow the Hydro-x to control lights using their extra-low-voltage control option.\u003c\/p\u003e\n\n\u003cp\u003eThis D lighting control adaptor (LMA-12) is specially designed to control D ballasts.\u003c\/p\u003e\n\n\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003eKey features\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003eLED power indicator\u003c\/li\u003e\n\n  \u003cli\u003eConverts digital signals to analogue signals\u003c\/li\u003e\n\n  \u003cli\u003eSeamless connection with Hydro-X via an RJ12 cable\u003c\/li\u003e\n\n  \u003cli\u003eReady to use\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003ePackage contents\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003e1 x D lighting control adaptor (LMA-12)\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003e12 VDC\u003c\/li\u003e\n\n  \u003cli\u003e0.1 A\u003c\/li\u003e\n\n  \u003cli\u003e32–122 °F, \u0026lt;90% RH\u003c\/li\u003e\n\n\u003c\/ul\u003e","brand":"Future of Grow","offers":[{"title":"Default Title","offer_id":55081610346821,"sku":"LMA-12","price":56.73,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0899\/2863\/0597\/files\/c1c26a_81f1059090304a2a941010873ba4a486_mv2_dqq1cd.webp?v=1753112111"},{"product_id":"lma-14","title":"LMA-14","description":"\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003eProduct description\u003c\/h2\u003e\n\n\u003cp\u003eTrolMaster’s Hydro-x system can control most of the supplemental grow lights sold today. Most luminaire manufacturers offer the option of controlling their lighting systems using what is known as extra-low-voltage control. This extra-low-voltage control can take many forms and communication protocols. TrolMaster makes several types of lighting adaptor (LMA units) that allow the Hydro-x to control lights using their extra-low-voltage control option.\u003c\/p\u003e\n\n\u003cp\u003eThis LMA-14 lighting adaptor is specially designed to control LED grow lights or any light using the 0–10 V protocol.\u003c\/p\u003e\n\n\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003eKey features\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003eLED power indicator\u003c\/li\u003e\n\n  \u003cli\u003eConverts digital signals to analogue signals\u003c\/li\u003e\n\n  \u003cli\u003eSeamless connection with Hydro-X via an RJ12 cable\u003c\/li\u003e\n\n  \u003cli\u003eReady to use\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003ePackage contents\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003e1 x F lighting control adaptor (LMA-14)\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003e12 VDC\u003c\/li\u003e\n\n  \u003cli\u003e0.1 A\u003c\/li\u003e\n\n  \u003cli\u003e32–122 °F, \u0026lt;90% RH\u003c\/li\u003e\n\n\u003c\/ul\u003e","brand":"Future of Grow","offers":[{"title":"Default Title","offer_id":55081610707269,"sku":"LMA-14","price":56.88,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0899\/2863\/0597\/files\/c1c26a_accbe9cb9e8147e8b8ae610d5f2498ad_mv2_1_efvkpf.webp?v=1751965770"},{"product_id":"lma-13","title":"LMA-13","description":"\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003eProduct description\u003c\/h2\u003e\n\n\u003cp\u003eTrolMaster’s Hydro-x system can control most of the supplemental grow lights sold today. Most luminaire manufacturers offer the option of controlling their lighting systems using what is known as extra-low-voltage control. This extra-low-voltage control can take many forms and communication protocols. TrolMaster makes several types of lighting adaptor (LMA units) that allow the Hydro-x to control lights using their extra-low-voltage control option.\u003c\/p\u003e\n\n\u003cp\u003eThis S lighting control adaptor (LMA-13) is specially designed to control S ballasts.\u003c\/p\u003e\n\n\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003eKey features\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003eLED power indicator\u003c\/li\u003e\n\n  \u003cli\u003eConverts digital signals to analogue signals\u003c\/li\u003e\n\n  \u003cli\u003eSeamless connection with Hydro-X via an RJ12 cable\u003c\/li\u003e\n\n  \u003cli\u003eReady to use\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003ePackage contents\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003e1 x S lighting control adaptor (LMA-13)\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003e12 VDC\u003c\/li\u003e\n\n  \u003cli\u003e0.1 A\u003c\/li\u003e\n\n  \u003cli\u003e32–122 °F, \u0026lt;90% RH\u003c\/li\u003e\n\n\u003c\/ul\u003e","brand":"Future of Grow","offers":[{"title":"Default Title","offer_id":55081610838341,"sku":"LMA-13","price":56.73,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0899\/2863\/0597\/files\/c1c26a_30dac53b48e94a07a19d7ee6175a5600_mv2_z3ksff.webp?v=1751965776"},{"product_id":"dsh-2e","title":"DSH-2E","description":"\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003eProduct description\u003c\/h2\u003e\n\n\u003cp\u003eTrolMaster DSH-2 (240 V) humidity \/ device control modules let the user easily connect standard humidification or dehumidification equipment to the Hydro-x and control it. DSH modules are rated at 10 A. *Use with dehumidifiers drawing less than 7 A to avoid a current overload.\u003c\/p\u003e\n\n\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003eKey features\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003eLED power indicator\u003c\/li\u003e\n\n  \u003cli\u003eRJ12 socket\u003c\/li\u003e\n\n  \u003cli\u003eAddressing\u003c\/li\u003e\n\n  \u003cli\u003eReady to use\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003ePackage contents\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003e1 x Device station\u003c\/li\u003e\n\n  \u003cli\u003e1 x 16 ft RJ12 cable\u003c\/li\u003e\n\n  \u003cli\u003e1 x 4 ft RJ12 cable\u003c\/li\u003e\n\n  \u003cli\u003e1 x RJ12 T-splitter\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003e100–240 VAC\/10 A, 32–122 °F, \u0026lt;90% RH\u003c\/li\u003e\n\n\u003c\/ul\u003e","brand":"Future of Grow","offers":[{"title":"Default Title","offer_id":55081611624773,"sku":"DSH-2E","price":84.63,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0899\/2863\/0597\/files\/c1c26a_58ee611fe20b4801921d5a8eae0f59b3_mv2_kjhxmg.webp?v=1751965787"},{"product_id":"dcc-1","title":"DCC-1","description":"\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003eProduct description\u003c\/h2\u003e\n\n\u003cp\u003eThe TrolMaster DCC-1 offers a simple solution for controlling a single device with more than one condition. For example, people like to switch on their exhaust fans when the temperature or humidity is too high, and to switch off the CO2 when they switch on the exhaust fans. There are many other examples where two conditions can be either combined or kept separate. The DCC-1 is designed to be used in combination with one of TrolMaster’s plug-in modules (DSC-1, DSH-1\/2, DST-1\/2 and DSP-1). Once connected to the plug-in module with the RJ12 cable built into the DCC-1, the DCC-1 works together with that plug-in module to control the device connected to it.\u003c\/p\u003e\n\n\u003cp\u003eThe DCC-1 can also be configured to work in two different ways using the ‘Interlock’ function.\u003c\/p\u003e\n\n\u003cp\u003eINTERLOCK OFF: when the DCC-1 interlock is off, EITHER of the conditions associated with this pair of modules used together can be triggered individually to activate the device (modules used in ‘parallel’).\u003c\/p\u003e\n\n\u003cp\u003eINTERLOCK ON: when the DCC-1 interlock is on, BOTH conditions associated with this pair of modules used together must be triggered TOGETHER to activate the device (modules used in ‘series’).\u003c\/p\u003e\n\n\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003eKey features\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003eLED indicator\u003c\/li\u003e\n\n  \u003cli\u003eReady to use\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003ePackage contents\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003e1x DCC-1\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003eInput voltage: 12 VAC\u003c\/li\u003e\n\n  \u003cli\u003eMax. current: 0.2 A\u003c\/li\u003e\n\n  \u003cli\u003eOperating environment: temperature: 32–122 °F (0–50 °C)\u003c\/li\u003e\n\n  \u003cli\u003eHumidity: ≤90%\u003c\/li\u003e\n\n\u003c\/ul\u003e","brand":"Future of Grow","offers":[{"title":"Default Title","offer_id":55081614180677,"sku":"DCC-1","price":72.54,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0899\/2863\/0597\/files\/dcc-1-default-future-of-grow-2114346.webp?v=1753118684"},{"product_id":"dsv-1","title":"DSV-1","description":"\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003eProduct description\u003c\/h2\u003e\n\n\u003cp\u003eThe Trolmaster DSV-1 is an extra-low-voltage output module that can be used with the HCS-1 and HCS-2 controllers. The DSV-1 can be configured for use as a temperature, humidity, CO2 or timer module.\u003c\/p\u003e\n\n\u003cp\u003eSeveral output voltages can be selected by the user. The DSV-1 can supply either 12 or 24 VDC up to 0.5 A, or 12 or 24 VAC up to 4.8 VA. Once the module is configured, it will activate the extra-low-voltage device connected to the DSV-1.\u003c\/p\u003e\n\n\u003cp\u003eThis allows the user to connect extra-low-voltage devices directly, such as solenoids, valves, audiovisual alarms or any other device that needs a 12 to 24 volt AC or DC supply to operate.\u003c\/p\u003e\n\n\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003eKey features\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003eLCD display, easy to use\u003c\/li\u003e\n\n  \u003cli\u003eSeamless connection with Hydro-X and Hydro-X Pro\u003c\/li\u003e\n\n  \u003cli\u003eMulti-purpose assignment\u003c\/li\u003e\n\n  \u003cli\u003eReady to use\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003ePackage contents\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003e1 x DSV-1 extra-low-voltage station\u003c\/li\u003e\n\n  \u003cli\u003e1 x 16 ft RJ12 cable\u003c\/li\u003e\n\n  \u003cli\u003e1 x 4 ft RJ12 cable\u003c\/li\u003e\n\n  \u003cli\u003e1 x RJ12 T-splitter\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003eInput voltage: 100–240 VAC, 50\/60 Hz\u003c\/li\u003e\n\n  \u003cli\u003eOutput voltage: DC24\/ AC24 0.25 A\u003c\/li\u003e\n\n  \u003cli\u003eDC12\/ AC12 0.5 A\u003c\/li\u003e\n\n  \u003cli\u003eOperating environment: temperature 32–122 °F, humidity ≤90%\u003c\/li\u003e\n\n  \u003cli\u003ePackage dimensions: 85 mm × 80 mm × 90 mm\u003c\/li\u003e\n\n\u003c\/ul\u003e","brand":"Future of Grow","offers":[{"title":"Default Title","offer_id":55081615163717,"sku":"DSV-1","price":76.26,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0899\/2863\/0597\/files\/dsv-1-default-future-of-grow-6730515.webp?v=1753118652"},{"product_id":"dsp-2","title":"DSP-2","description":"\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003eProduct description\u003c\/h2\u003e\n\n\u003cp\u003eThe TrolMaster DSP-2 programming module (timer module) works as a multifunction timer. It lets you easily connect and control, via the Hydro-X system, any device that needs to be managed by TIME. Any device with a maximum rating of 10 A at 240 V can be controlled by the DSP-2.\u003c\/p\u003e\n\n\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003eKey features\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eBuilt-in multifunction timer\u003c\/li\u003e\n  \u003cli\u003eDirect control via the Hydro-X system\u003c\/li\u003e\n  \u003cli\u003eCompatible with any device that requires time-based scheduling\u003c\/li\u003e\n  \u003cli\u003eSupports up to 10 A @ 240 V\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003ePackage contents\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1x DSP-2 module (timer)\u003c\/li\u003e\n  \u003cli\u003e1x Connection cable\u003c\/li\u003e\n  \u003cli\u003e1x Installation guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eOperating voltage: 240 V\u003c\/li\u003e\n  \u003cli\u003eMaximum rating: 10 A\u003c\/li\u003e\n  \u003cli\u003eFunction: multifunction timer for electrical devices\u003c\/li\u003e\n  \u003cli\u003eCompatibility: Hydro-X system\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Future of Grow","offers":[{"title":"Default Title","offer_id":55081615294789,"sku":"DSP-2","price":84.63,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0899\/2863\/0597\/files\/c1c26a_2f523b75946b406e91d3044cd5bcb199_mv2_fnxedu.avif?v=1751965846"},{"product_id":"dsd-1","title":"DSD-1","description":"\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003eProduct description\u003c\/h2\u003e\n\n\u003cp\u003eThe TrolMaster DSD-2 Dry-Contact module offers a simple, flexible solution for connecting and controlling devices via the Hydro-X system using a ‘dry contact’ or an activation relay. Some equipment needs a normally open or normally closed contact to operate, and the DSD-2 meets exactly this need. Plugged into a standard NEMA 120 V 15\/20 A socket, it powers its own internal circuit. The user can then connect any control voltage (up to 240 V @ 10 A) to the module’s common, normally open and\/or normally closed terminals. Virtually any device that needs a dry contact or a relay to be activated can be controlled by the DSD-2. Like other TrolMaster power modules, it connects to the Hydro-X ‘devices’ line and can manage a wide range of equipment, such as lighting contactors, blackout curtains, pumps, and temperature, humidity or CO2 devices.\u003c\/p\u003e\n\n\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003eKey features\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eActivation by dry contact or relay (NO \/ NC)\u003c\/li\u003e\n  \u003cli\u003eCompatible with a wide range of equipment\u003c\/li\u003e\n  \u003cli\u003eDirect connection to the Hydro-X system\u003c\/li\u003e\n  \u003cli\u003eSupports up to 240 V @ 10 A\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003ePackage contents\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1x DSD-2 Dry-Contact module\u003c\/li\u003e\n  \u003cli\u003e1x Connection cable\u003c\/li\u003e\n  \u003cli\u003e1x Installation guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eInput voltage: 120 V (NEMA 15\/20 A socket)\u003c\/li\u003e\n  \u003cli\u003eControl voltage: up to 240 V @ 10 A\u003c\/li\u003e\n  \u003cli\u003eContacts: common, NO (normally open), NC (normally closed)\u003c\/li\u003e\n  \u003cli\u003eCompatibility: Hydro-X system\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Future of Grow","offers":[{"title":"Default Title","offer_id":55081616212293,"sku":"DSD-1","price":76.26,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0899\/2863\/0597\/files\/dsd-1-default-future-of-grow-8537030.webp?v=1752033933"},{"product_id":"ecs-2","title":"ECS-2","description":"\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003eProduct description\u003c\/h2\u003e\n\n\u003cp\u003eThe ECS-2 cable set is designed to connect Hydro-X to most LED drivers with pigtail wiring. The ECS-2 comes with a 16 ft RJ12 cable, a Y-splitter and a special 4 ft RJ12 to female connector cable. Simply connect the two wires from your LED driver to the terminal block, with each of the controlled lights wired in a ‘daisy-chain’ configuration back to the Hydro-X LMA adaptor.\u003c\/p\u003e\n\n\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003eKey features\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003eReady to use\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003ePackage contents\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003e1 x 16 ft RJ12 cable\u003c\/li\u003e\n\n  \u003cli\u003e1 x 4 ft RJ12 to female connector cable\u003c\/li\u003e\n\n  \u003cli\u003e1 x T-shaped splitter\u003c\/li\u003e\n\n  \u003cli\u003e1 x 3.5 mm female connector\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003e32–122 °F, \u0026lt;90% RH\u003c\/li\u003e\n\n\u003c\/ul\u003e","brand":"Future of Grow","offers":[{"title":"Default Title","offer_id":55081617981765,"sku":"ECS-2","price":20.46,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0899\/2863\/0597\/files\/ecs-2-default-future-of-grow-4770845.webp?v=1753111507"},{"product_id":"ecs-1","title":"ECS-1","description":"\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003eProduct description\u003c\/h2\u003e\n\n\u003cp\u003eInformation not provided by the manufacturer\u003c\/p\u003e\n\n\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003eKey features\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003eReady to use\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003ePackage contents\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003e1 x 16 ft male-to-male RJ12 cable\u003c\/li\u003e\n\n  \u003cli\u003e1 x 4 ft male-to-male RJ12 cable\u003c\/li\u003e\n\n  \u003cli\u003e1 x RJ12 T-splitter\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003e32–122 °F, \u0026lt;90% RH\u003c\/li\u003e\n\n\u003c\/ul\u003e","brand":"Future of Grow","offers":[{"title":"Default Title","offer_id":55081618571589,"sku":"ECS-1","price":19.53,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0899\/2863\/0597\/files\/ecs-1-default-future-of-grow-2284989.webp?v=1753111071"},{"product_id":"sph-1","title":"SPH-1","description":"\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003eProduct description\u003c\/h2\u003e\n\n\u003cp\u003eTrolMaster’s SPH-1 splitter hub makes installing our controllers as simple as plugging in a telephone cable. The SPH-1 hub uses a single RJ12 cable input socket and provides (8) individual RJ12 output sockets that can be connected to various TrolMaster sensors, adaptors and device modules. Using the SPH-1 allows a ‘clean’ installation and removes the need to use Y-splitters in series to interconnect several modules or sensors. The SPH-1 is also a powered hub, which means it boosts the signals passing through the SPH-1, so that more modules, sensors and lighting adaptors can be connected to TrolMaster controllers. Using the SPH-1, an almost unlimited number of LED \/ HID lights can be controlled with a single TrolMaster controller. The SPH-1 comes complete with the SPH-1 hub, a 16 ft RJ12 cable and the 12 VDC power supply. The SPH-1 can be placed in a central location with a single RJ12 cable connecting it to the main controller. From the SPH-1 hub, the individual RJ12 sockets can be connected to each of the sensors, device modules or lighting adaptors.\u003c\/p\u003e\n\n\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003eKey features\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003eLED indicator\u003c\/li\u003e\n\n  \u003cli\u003eReady to use\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003ePackage contents\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003e1x RJ12 splitter hub\u003c\/li\u003e\n\n  \u003cli\u003e1x 12 V power adaptor\u003c\/li\u003e\n\n  \u003cli\u003e1x 4 ft RJ12 cable\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003e32–122 °F, \u0026lt;90% RH\u003c\/li\u003e\n\n\u003c\/ul\u003e","brand":"Future of Grow","offers":[{"title":"Default Title","offer_id":55081619128645,"sku":"SPH-1","price":31.62,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0899\/2863\/0597\/files\/sph-1-default-future-of-grow-1597405.webp?v=1752033928"},{"product_id":"ecs-9","title":"ECS-9","description":"\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003eProduct description\u003c\/h2\u003e\n\n\u003cp\u003eThe ECS-9 RJ12 to 4-pin connector cable is simply a 12 ft cable for use with the T lighting control adaptor (LMA-T) and ThinkGrow LEDs with threaded waterproof connectors for interconnection.\u003c\/p\u003e\n\n\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003eKey features\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003eSeamless connection\u003c\/li\u003e\n\n  \u003cli\u003eReady to use\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003ePackage contents\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003e1x ECS-9\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003e32–122 °F, \u0026lt;90% RH\u003c\/li\u003e\n\n\u003c\/ul\u003e","brand":"Future of Grow","offers":[{"title":"Default Title","offer_id":55081620701509,"sku":"ECS-9","price":19.53,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0899\/2863\/0597\/files\/ecs-9-default-future-of-grow-9317441.webp?v=1753111070"},{"product_id":"dst-2","title":"DST-2","description":"\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003eProduct description\u003c\/h2\u003e\n\n\u003cp\u003eTrolMaster DST-2 temperature control modules make it easy to connect standard heating or cooling devices to the Hydro-X controller and manage them. Any heating or cooling device with a maximum rating of 10 amps at 240 volts can be controlled by the DST-2.\u003c\/p\u003e\n\n\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003eKey features\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with heating and cooling devices\u003c\/li\u003e\n  \u003cli\u003eDirect control via the Hydro-X system\u003c\/li\u003e\n  \u003cli\u003eSupports devices up to 10 A at 240 V\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003ePackage contents\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1x DST-2 module\u003c\/li\u003e\n  \u003cli\u003e1x Connection cable\u003c\/li\u003e\n  \u003cli\u003e1x Installation guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eOperating voltage: 240 V\u003c\/li\u003e\n  \u003cli\u003eMaximum capacity: 10 A\u003c\/li\u003e\n  \u003cli\u003eCompatibility: Hydro-X system\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Future of Grow","offers":[{"title":"Default Title","offer_id":55081623486789,"sku":"DST-2","price":84.63,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0899\/2863\/0597\/files\/dst-2-default-future-of-grow-4040990.webp?v=1752033922"},{"product_id":"mbs-th","title":"MBS-TH","description":"\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003eProduct description\u003c\/h2\u003e\n\n\u003cp\u003e3-in-1 temperature\/humidity\/light sensor for the Hydro-X system. Built-in photocell detecting day\/night mode. 8 ft RJ12 cable. Plug \u0026amp; Play. Note: this is a replacement or additional part. The main controller already comes with a sensor.\u003c\/p\u003e\n\n\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003eKey features\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003eBuilt-in photocell detecting day\/night mode\u003c\/li\u003e\n\n  \u003cli\u003ePlug \u0026amp; Play\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003ePackage contents\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003e1 x 3-in-1 temperature\/humidity\/light sensor\u003c\/li\u003e\n\n  \u003cli\u003e1 x 16 ft RJ12 cable\u003c\/li\u003e\n\n  \u003cli\u003e1 x RJ12 T-splitter\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003eOutput voltage: 0–11.5 V\u003c\/li\u003e\n\n  \u003cli\u003eMaximum current: 0.2 A\u003c\/li\u003e\n\n  \u003cli\u003eOperating environment: temperature 32–122 °F, humidity ≤90%\u003c\/li\u003e\n\n  \u003cli\u003ePackage dimensions: 160 mm (L) × 86 mm (W) × 86 mm (H)\u003c\/li\u003e\n\n\u003c\/ul\u003e","brand":"Future of Grow","offers":[{"title":"Default Title","offer_id":55081624011077,"sku":"MBS-TH","price":76.26,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0899\/2863\/0597\/files\/mbs-th-default-future-of-grow-5686590.webp?v=1753112338"},{"product_id":"mbs-par","title":"MBS-PAR","description":"\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003eProduct description\u003c\/h2\u003e\n\n\u003cp\u003eThe full-spectrum quantum sensor (MBS-PAR) provides accurate, cost-effective measurement of photosynthetically active radiation (PAR) from all light sources used to grow plants. The full-spectrum quantum sensor has a spectral range of 389 to 692 nm ±5 nm. The improved spectral response increases the accuracy of LED measurements. Used together with the Hydro-X controller, the PPFD sensor will AUTOMATICALLY increase or decrease the output level of your supplemental lighting systems to continuously maintain the exact light level (in PPFD) selected by the user.\u003c\/p\u003e\n\n\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003eKey features\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003eOn-site reading\u003c\/li\u003e\n\n  \u003cli\u003eReady to use\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003ePackage contents\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003e1 x Full-spectrum quantum sensor\u003c\/li\u003e\n\n  \u003cli\u003e1 x 1\/2” pole clamp\u003c\/li\u003e\n\n  \u003cli\u003e1 x 4 ft RJ12 cable\u003c\/li\u003e\n\n  \u003cli\u003e1 x RJ12 T-splitter\u003c\/li\u003e\n\n  \u003cli\u003e2 x 1\/2” end caps\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003eOperating environment: temperature 32–122 °F, humidity ≤90%\u003c\/li\u003e\n\n  \u003cli\u003ePackage dimensions: 160 mm (L) × 86 mm (W) × 86 mm (H)\u003c\/li\u003e\n\n\u003c\/ul\u003e","brand":"Future of Grow","offers":[{"title":"Default Title","offer_id":55081624633669,"sku":"MBS-PAR","price":453.84,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0899\/2863\/0597\/files\/mbs-par-default-future-of-grow-4320653.webp?v=1753118431"},{"product_id":"mbs-s8","title":"MBS-S8","description":"\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003eProduct description\u003c\/h2\u003e\n\n\u003cp\u003eThe optional CO2 sensor (MBS-S8) measures CO2 ppm in the grow area. The MBS-S8 allows users to connect and control their supplemental CO2 system using the Hydro-X. *Used in combination with one or more DSC-1 CO2 device modules.\u003c\/p\u003e\n\n\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003eKey features\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003eBuilt-in photocell detecting day\/night mode\u003c\/li\u003e\n\n  \u003cli\u003eReady to use\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003ePackage contents\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003e1 x CO2 sensor (MBS-S8)\u003c\/li\u003e\n\n  \u003cli\u003e1 x 16 ft RJ12 cable\u003c\/li\u003e\n\n  \u003cli\u003e1 x RJ12 T-splitter\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003eOutput voltage: 0–11.5 V\u003c\/li\u003e\n\n  \u003cli\u003eMaximum current: 0.2 A\u003c\/li\u003e\n\n  \u003cli\u003eOperating environment: temperature 32–122 °F, humidity ≤90%\u003c\/li\u003e\n\n  \u003cli\u003ePackage dimensions: 160 mm (L) × 86 mm (W) × 86 mm (H)\u003c\/li\u003e\n\n  \u003cli\u003eGross weight per package: 0.37 kg\u003c\/li\u003e\n\n\u003c\/ul\u003e","brand":"Future of Grow","offers":[{"title":"Default Title","offer_id":55081624797509,"sku":"MBS-S8","price":216.69,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0899\/2863\/0597\/files\/mbs-s8-default-future-of-grow-7891520.webp?v=1753118414"},{"product_id":"mbs-sd","title":"MBS-SD","description":"\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003eProduct description\u003c\/h2\u003e\n\n\u003cp\u003eThe optional smoke detector (MBS-SD) can alert users to the presence of smoke in their grow area at ANY TIME. Up to 5 smoke detectors can be connected to a single Hydro-X controller. If ANY of the smoke detectors detects smoke in the area, the user receives an alert on their phone about the potential problem BEFORE it gets out of control.\u003c\/p\u003e\n\n\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003eKey features\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003eSmall built-in address assignment button\u003c\/li\u003e\n\n  \u003cli\u003ePhotocell detecting day\/night mode\u003c\/li\u003e\n\n  \u003cli\u003eReady to use\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003ePackage contents\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003e1 x Smoke detector (MBS-SD)\u003c\/li\u003e\n\n  \u003cli\u003e1 x 16 ft RJ12 cable\u003c\/li\u003e\n\n  \u003cli\u003e1 x RJ12 T-splitter\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003eOutput voltage: 0–11.5 V\u003c\/li\u003e\n\n  \u003cli\u003eMaximum current: 0.2 A\u003c\/li\u003e\n\n  \u003cli\u003eOperating environment: temperature 32–122 °F, humidity ≤90%\u003c\/li\u003e\n\n  \u003cli\u003ePackage dimensions: 160 mm (L) × 86 mm (W) × 86 mm (H)\u003c\/li\u003e\n\n  \u003cli\u003eGross weight per package: 0.37 kg\u003c\/li\u003e\n\n\u003c\/ul\u003e","brand":"Future of Grow","offers":[{"title":"Default Title","offer_id":55081625157957,"sku":"MBS-SD","price":55.8,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0899\/2863\/0597\/files\/mbs-sd-default-future-of-grow-5352126.webp?v=1753118390"},{"product_id":"wcs-3","title":"WCS-3","description":"\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003eProduct description\u003c\/h2\u003e\n\n\u003cp\u003eThe TrolMaster WCS-3 water content sensor is specially designed to measure the moisture level (as a percentage) of the growing medium. The WCS-3 can be used with the TrolMaster Aqua-X (NFS-1), Aqua-X Plus (NFS-3), Aqua-X Pro (NFS-2), Hydro-X Pro (HCS-2) and Tent-X (TCS-1) control systems. Each WCS-3 is a 3-pin volumetric water content (VWC) sensor. To use the WCS-3, insert the 3-pin sensor into the growing medium to be measured, such as coco coir, soil or rockwool. You can connect several medium moisture sensors to a single controller. Up to 50 WCS-3 sensors can be connected to the NFS-2 and HCS-2 controllers, 20 to the NFS-3, 8 to the NFS-1 controller and 1 to the TCS-1 controller. *NOTE: only one WCS-3 can be connected to the TCS-1. Each WCS-3 has a built-in LCD screen on one side of the sensor that becomes ‘active’ and can be read when the sensor is shaken or disturbed. The screen displays the current VWC% reading directly on the sensor.\u003c\/p\u003e\n\n\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003eKey features\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003eUltra-slim, simple design\u003c\/li\u003e\n\n  \u003cli\u003eTap-activated LCD screen\u003c\/li\u003e\n\n  \u003cli\u003eCompatible with crop steering irrigation\u003c\/li\u003e\n\n  \u003cli\u003eDesigned for daisy-chaining multiple sensors\u003c\/li\u003e\n\n  \u003cli\u003eReal-time water content measurement\u003c\/li\u003e\n\n  \u003cli\u003eAlarm and mobile notification when the threshold is exceeded\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003ePackage contents\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003e1x Water content sensor 3\u003c\/li\u003e\n\n  \u003cli\u003e1x M12 T-splitter\u003c\/li\u003e\n\n  \u003cli\u003e1x 4 ft M12 cable\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003eInput voltage: 12 V = 0.1 A\u003c\/li\u003e\n\n  \u003cli\u003eInput current: 100–200 mA\u003c\/li\u003e\n\n  \u003cli\u003eOperating temperature: 32–122 °F\u003c\/li\u003e\n\n  \u003cli\u003eHumidity: \u0026lt;90% RH\u003c\/li\u003e\n\n  \u003cli\u003ePackage dimensions: 170 mm (L) × 90 mm (W) × 54 mm (H)\u003c\/li\u003e\n\n\u003c\/ul\u003e","brand":"Future of Grow","offers":[{"title":"Default Title","offer_id":55081625813317,"sku":"WCS-3","price":115.32,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0899\/2863\/0597\/files\/c1c26a_075de0a0d5dc4b56b48bb20db800f2e2_mv2_ize5zw.avif?v=1755548764"},{"product_id":"wcs-2","title":"WCS-2","description":"\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003eProduct description\u003c\/h2\u003e\n\n\u003cp\u003eMonitoring your growing medium for the right moisture percentage and electrical conductivity (EC) is an important factor in high-yield growing applications. TrolMaster understands that today’s ‘crop steering’ method involves more precise control of the quantity and strength of nutrients in the growing medium to achieve the best results. The WCS-2 water content sensor gives users an accurate, simple way to monitor their growing medium. The WCS-2 consists of a multi-pin sensor assembly that is inserted into your growing medium. Once the WCS-2 has been calibrated to your growing medium and nutrients, it provides consistent readings of the actual water content of the growing medium, the temperature of the growing medium and also the EC of the growing medium. You can even set alarm ‘limits’ for each variable monitored by the WCS-2 so that remote notifications are sent via the TrolMaster or TM+ apps.\u003c\/p\u003e\n\n\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003eKey features\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003eLCD display, easy to use\u003c\/li\u003e\n\n  \u003cli\u003eAddressing button\u003c\/li\u003e\n\n  \u003cli\u003eReal-time measurement of growing medium moisture, temperature and EC\u003c\/li\u003e\n\n  \u003cli\u003eAlarm and mobile notification when the threshold is exceeded\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003ePackage contents\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003e1x Water content sensor\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003eAbsolute maximum ratings\u003c\/li\u003e\n\n  \u003cli\u003eSupply voltage: 10.8–13.2 volts\u003c\/li\u003e\n\n  \u003cli\u003eInput current: 100–200 mA\u003c\/li\u003e\n\n  \u003cli\u003eOperating current: 140 mA typical (supply voltage = 12 V)\u003c\/li\u003e\n\n  \u003cli\u003eOperating temperature: 32–122 °F\u003c\/li\u003e\n\n  \u003cli\u003eStorage temperature: 0–140 °F\u003c\/li\u003e\n\n  \u003cli\u003eHumidity: ≤90%\u003c\/li\u003e\n\n  \u003cli\u003eMeasurement performance\u003c\/li\u003e\n\n  \u003cli\u003eWater content (WC)\u003c\/li\u003e\n\n  \u003cli\u003eRange: 0–10%\u003c\/li\u003e\n\n  \u003cli\u003eResolution: 1%\u003c\/li\u003e\n\n  \u003cli\u003eAccuracy: -2 to +2%\u003c\/li\u003e\n\n  \u003cli\u003eTemperature\u003c\/li\u003e\n\n  \u003cli\u003eRange: 0–122 °F\u003c\/li\u003e\n\n  \u003cli\u003eResolution: 0.1 °F\u003c\/li\u003e\n\n  \u003cli\u003eAccuracy: -1 to +1 °F\u003c\/li\u003e\n\n  \u003cli\u003eElectrical conductivity (EC)\u003c\/li\u003e\n\n  \u003cli\u003eRange: 0–5 mS\/cm\u003c\/li\u003e\n\n  \u003cli\u003eResolution: 0.01 mS\/cm\u003c\/li\u003e\n\n  \u003cli\u003eAccuracy: -0.2 to +0.2 mS\/cm\u003c\/li\u003e\n\n\u003c\/ul\u003e","brand":"Future of Grow","offers":[{"title":"Default Title","offer_id":55081626075461,"sku":"WCS-2","price":302.25,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0899\/2863\/0597\/files\/wcs-2-default-future-of-grow-8475903.webp?v=1753193851"},{"product_id":"wd-1","title":"WD-1","description":"\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003eProduct description\u003c\/h2\u003e\n\n\u003cp\u003eThe WD-1 water detector can be used in two ways. First, it can simply be used to monitor the floor or an area for the presence of water… like a leak detector. The other way to use the WD-1 is as a water verification monitor. Used this way, the water detector is placed where run-off will collect (or where water is delivered to the growing medium). Each output (solenoid valve or pump) on the Aqua-X can be ‘assigned’ to a specific WD-1. Every time the solenoid valve or pump assigned to the WD-1 is activated by the Aqua-X, the WD-1 must detect water within an adjustable time. If no water is detected (pump or solenoid valve failure), the Aqua-X sends the user an ‘irrigation failure’ alert. Up to 25 WD-1 detectors can be connected to a single Aqua-X.\u003c\/p\u003e\n\n\u003cp\u003e*Use two water detectors (WD-1\/2) to enable the new auto-fill function on the Aqua-X Pro. One water detector is placed at the bottom of the nutrient reservoir and another at the top of the reservoir. When the liquid level drops below the lower sensor, the Aqua-X Pro activates a solenoid valve or pump and the reservoir fills up to the upper sensor.\u003c\/p\u003e\n\n\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003eKey features\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003eLCD screen, easy to use\u003c\/li\u003e\n\n  \u003cli\u003eAddressing button\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003ePackage contents\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003e1 x Water detector\u003c\/li\u003e\n\n  \u003cli\u003e1 x Contact point\u003c\/li\u003e\n\n  \u003cli\u003e1 x RJ12 T-splitter\u003c\/li\u003e\n\n  \u003cli\u003e1 x 16 ft RJ12 cable\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003e12 VDC\u003c\/li\u003e\n\n  \u003cli\u003e0.1 A\u003c\/li\u003e\n\n  \u003cli\u003e32–122 °F, \u0026lt;90% RH\u003c\/li\u003e\n\n\u003c\/ul\u003e","brand":"Future of Grow","offers":[{"title":"Default Title","offer_id":55081626206533,"sku":"WD-1","price":71.61,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0899\/2863\/0597\/files\/wd-1-default-future-of-grow-5252800.webp?v=1753193853"},{"product_id":"wcs-1","title":"WCS-1","description":"\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003eProduct description\u003c\/h2\u003e\n\n\u003cp\u003eThe WCS-1 water content sensor lets users monitor the water\/nutrient percentage in the growing medium. The moisture level\/water content is displayed in real time on the WCS module itself, on the Aqua-X and in the app. This data is shown on a graph (in the app) and helps users visualise the dry-back time and adjust their irrigation timers\/irrigation cycles. Up to 8 WCS-1 sensors can be connected to a single Aqua-X. When several WCS-1 sensors are connected to a single Aqua-X, the value displayed on the Aqua-X and in the app is the AVERAGE of all the sensors.\u003c\/p\u003e\n\n\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003eKey features\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003eLCD display, easy to use\u003c\/li\u003e\n\n  \u003cli\u003eAddressing button\u003c\/li\u003e\n\n  \u003cli\u003eReal-time water content measurement\u003c\/li\u003e\n\n  \u003cli\u003eAlarm when the threshold is exceeded\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003ePackage contents\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003e1 x Water content sensor\u003c\/li\u003e\n\n  \u003cli\u003e1 x RJ12 T-splitter\u003c\/li\u003e\n\n  \u003cli\u003e1 x 16 ft RJ12 cable\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003e32–122 °F, \u0026lt;90% RH\u003c\/li\u003e\n\n\u003c\/ul\u003e","brand":"Future of Grow","offers":[{"title":"Default Title","offer_id":55081626403141,"sku":"WCS-1","price":224.6,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0899\/2863\/0597\/files\/wcs-1-default-future-of-grow-7219771.webp?v=1753193853"},{"product_id":"pph-2","title":"PPH-2","description":"\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003eProduct description\u003c\/h2\u003e\n\n\u003cp\u003eTrolMaster pH probes provide accurate, reliable monitoring of the pH of the water monitored by the Aqua-X. The PPH-2 is a commercial-grade probe that connects to the Aqua-X via the AMP-2. It is designed to be used inline with existing PVC pipes and can also be placed in a water tank.\u003c\/p\u003e\n\n\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003eKey features\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003eSuitable for a wide range of applications: hydroponics, aquariums, laboratories, etc.\u003c\/li\u003e\n\n  \u003cli\u003e3.6-metre cable for flexible placement\u003c\/li\u003e\n\n  \u003cli\u003eBNC terminal for direct connection to the AMP-2 sensor board\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003ePackage contents\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003e1 x Inline pH sensor\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003e32–122 °F, \u0026lt;90% RH\u003c\/li\u003e\n\n\u003c\/ul\u003e","brand":"Future of Grow","offers":[{"title":"Default Title","offer_id":55081626829125,"sku":"PPH-2","price":183.21,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0899\/2863\/0597\/files\/pph-2-default-future-of-grow-7343991.webp?v=1752033892"},{"product_id":"pph-3","title":"PPH-3","description":"\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003eProduct description\u003c\/h2\u003e\n\n\u003cp\u003eTrolMaster’s new PPH-3 pH probe has been improved in several ways. The new PPH-3 has a reduced-diameter protective sleeve and a threaded body that allows the probe to be installed in standard 3\/4\" PVC tee fittings. The PPH-3 has an improved sensing element for more stable, reliable performance. It can be used with the AMP-2 or AMP-3 nutrient sensor module.\u003c\/p\u003e\n\n\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003eKey features\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003e1. Suitable for a wide range of applications: hydroponics, aquariums, laboratories, etc.\u003c\/li\u003e\n\n  \u003cli\u003e2. 3.6-metre-long cable for flexible placement\u003c\/li\u003e\n\n  \u003cli\u003e3. BNC terminal for direct connection to the AMP-2 and 3 sensor boards\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003ePackage contents\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003e1x pH sensor\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003e32–122 °F, \u0026lt;90% RH\u003c\/li\u003e\n\n\u003c\/ul\u003e","brand":"Future of Grow","offers":[{"title":"Default Title","offer_id":55081626894661,"sku":"PPH-3","price":203.67,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0899\/2863\/0597\/files\/pph-3-default-future-of-grow-3657085.webp?v=1753115514"},{"product_id":"amp-3","title":"AMP-3","description":"\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003eProduct description\u003c\/h2\u003e\n\n\u003cp\u003eThe AMP-3 sensor board can be used as a bridge between the sensors (pH sensor and EC\/temp sensor) and the Aqua-X Pro controller. It is specially designed for the Aqua-X Pro system. It can be connected to the main controller with a standard RJ12 cable. Several units can be connected in a single system for multiple monitoring applications. The pH level, EC level and water temperature are shown on its LCD screen and on the screen of the Aqua-X Pro main controller.\u003c\/p\u003e\n\n\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003eKey features\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003e1. LCD screen for on-site monitoring\u003c\/li\u003e\n\n  \u003cli\u003e2. RJ12 connection for flexible installation\u003c\/li\u003e\n\n  \u003cli\u003e3. Addressing key for multi-unit applications\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003ePackage contents\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003e1x Sensor board\u003c\/li\u003e\n\n  \u003cli\u003e1X 16 ft RJ12 cable\u003c\/li\u003e\n\n  \u003cli\u003e1X 4 ft RJ12 cable\u003c\/li\u003e\n\n  \u003cli\u003e1X T-splitter\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003eOperating environment: temperature 32–122 °F, humidity ≤90%\u003c\/li\u003e\n\n  \u003cli\u003ePackage dimensions: 160 mm (L) × 86 mm (W) × 86 mm (H)\u003c\/li\u003e\n\n\u003c\/ul\u003e","brand":"Future of Grow","offers":[{"title":"Default Title","offer_id":55081627615557,"sku":"AMP-3","price":132.06,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0899\/2863\/0597\/files\/amp-3-default-future-of-grow-8402214.webp?v=1753115465"},{"product_id":"pct-2","title":"PCT-2","description":"\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003eProduct description\u003c\/h2\u003e\n\n\u003cp\u003eTrolMaster EC and temperature probes provide accurate, reliable monitoring of the electrical conductivity (EC) and temperature of the water monitored by the Aqua-X. The PCT-2 is a commercial-grade probe that connects to the Aqua-X via the AMP-2. It is designed to be used inline with existing PVC pipes and can also be placed in a water tank.\u003c\/p\u003e\n\n\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003eKey features\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003eSuitable for a wide range of applications: hydroponics, aquariums, laboratories, etc.\u003c\/li\u003e\n\n  \u003cli\u003e3.6-metre cable for flexible placement.\u003c\/li\u003e\n\n  \u003cli\u003eThe Mini DIN terminal allows direct connection to the AMP-2 sensor board.\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003ePackage contents\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003e1 x Inline EC\/temp sensor\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003e32–122 °F, \u0026lt;90% RH\u003c\/li\u003e\n\n\u003c\/ul\u003e","brand":"Future of Grow","offers":[{"title":"Default Title","offer_id":55081627943237,"sku":"PCT-2","price":203.67,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0899\/2863\/0597\/files\/pct-2-default-future-of-grow-9141136.webp?v=1752033889"},{"product_id":"pct-3","title":"PCT-3","description":"\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003eProduct description\u003c\/h2\u003e\n\n\u003cp\u003eTrolMaster’s new PCT-3 EC and temperature probe has been improved in several ways. The new PCT-3 has a reduced-diameter protective sleeve and a threaded body that allows the probe to be installed in standard 3\/4\" PVC tee fittings. The PCT-3 also has an improved sensing element for more stable, reliable performance, and we have shortened the probe to fit tight spaces. It can be used with the AMP-2 or AMP-3 nutrient sensor module.\u003c\/p\u003e\n\n\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003eKey features\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003e1. Suitable for a wide range of applications: hydroponics, aquariums, laboratories, etc.\u003c\/li\u003e\n\n  \u003cli\u003e2. 3.6-metre-long cable for flexible placement\u003c\/li\u003e\n\n  \u003cli\u003e3. The BNC terminal allows direct connection to the AMP-2 and 3 sensor boards\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003ePackage contents\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003e1X pH sensor\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003e32–122 °F, \u0026lt;90% RH\u003c\/li\u003e\n\n\u003c\/ul\u003e","brand":"Future of Grow","offers":[{"title":"Default Title","offer_id":55081627976005,"sku":"PCT-3","price":224.13,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0899\/2863\/0597\/files\/pct-3-default-future-of-grow-6726661.webp?v=1755548605"},{"product_id":"pph-1","title":"PPH-1","description":"\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003eProduct description\u003c\/h2\u003e\n\n\u003cp\u003eTrolMaster pH probes provide accurate, reliable monitoring of the pH of the water monitored by the Aqua-X. The PPH-1 probe connects to the Aqua-X via the AMP-2.\u003c\/p\u003e\n\n\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003eKey features\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003eSuitable for a wide range of applications: hydroponics, aquariums, laboratories, etc.\u003c\/li\u003e\n\n  \u003cli\u003e3.6-metre cable for flexible placement.\u003c\/li\u003e\n\n  \u003cli\u003eBNC terminal for direct connection to the AMP-2 sensor board.\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003ePackage contents\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003e1 x pH sensor for reservoirs\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003e32–122 °F, \u0026lt;90% RH\u003c\/li\u003e\n\n\u003c\/ul\u003e","brand":"Future of Grow","offers":[{"title":"Default Title","offer_id":55081628041541,"sku":"PPH-1","price":81.84,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0899\/2863\/0597\/files\/pph-1-default-future-of-grow-1914044.webp?v=1755548690"},{"product_id":"pct-1","title":"PCT-1","description":"\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003eProduct description\u003c\/h2\u003e\n\n\u003cp\u003eTrolMaster EC and temperature probes provide accurate, reliable monitoring of the EC and temperature of the water monitored by the Aqua-X. The PCT-1 probe connects to the Aqua-X via the AMP-2.\u003c\/p\u003e\n\n\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003eKey features\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eSuitable for a wide range of applications: hydroponics, aquariums, laboratories, etc.\u003c\/li\u003e\n  \u003cli\u003e3.6-metre cable for flexible placement.\u003c\/li\u003e\n  \u003cli\u003eMini DIN terminal for direct connection to the AMP-2 sensor board.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003ePackage contents\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003e1 x EC\/temperature sensor for reservoirs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003eTechnical specifications\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003e32–122 °F, \u0026lt;90% RH\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Future of Grow","offers":[{"title":"Default Title","offer_id":55081628795205,"sku":"PCT-1","price":93.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0899\/2863\/0597\/files\/pct-1-default-future-of-grow-6990994.webp?v=1755548649"},{"product_id":"ecs-4","title":"ECS 4","description":"\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003eProduct description\u003c\/h2\u003e\n\n\u003cp\u003eThe ECS-4 extension cable is simply a 16 ft extension cable for use with the AMP-2 sensor board. It has one male and one female end and can extend the distance between the AMP-2 sensor board and the main controller.\u003c\/p\u003e\n\n\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003eKey features\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eSeamless connection\u003c\/li\u003e\n  \u003cli\u003ePlug and play\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003ePackage contents\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003e1 x 16 ft extension cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003eTechnical specifications\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003e32–122 °F, \u0026lt;90% RH\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Future of Grow","offers":[{"title":"Default Title","offer_id":55081629286725,"sku":"ECS 400","price":20.46,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0899\/2863\/0597\/files\/ecs-4-default-future-of-grow-2277839.webp?v=1753193849"},{"product_id":"tss-1","title":"TSS-1","description":"\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003eProduct description\u003c\/h2\u003e\n\n\u003cp\u003eAn additional detector can be added to the WD-1 using the TSS-1 T-splitter and water detector (sensor) set. It comes with a T-splitter and an additional water detector, so that a single WD-1 module can detect water at several points. This is useful for monitoring water spills or flooding, or for monitoring water run-off at several locations.\u003c\/p\u003e\n\n\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003eKey features\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eSeamless connection with the water detector\u003c\/li\u003e\n  \u003cli\u003ePlug and play\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003ePackage contents\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003e1 x Touch Spot\u003c\/li\u003e\n  \u003cli\u003e1 x T-Splitter Touch Spot\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003eTechnical specifications\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003e32–122 °F, \u0026lt;90% RH\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Future of Grow","offers":[{"title":"Default Title","offer_id":55081629483333,"sku":"TSS-1","price":31.62,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0899\/2863\/0597\/files\/tss-1-default-future-of-grow-6584716.webp?v=1753114691"},{"product_id":"ecs-6","title":"ECS-6","description":"\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003eProduct description\u003c\/h2\u003e\n\n\u003cp\u003eThe ECS-6 extension cable is simply a 16 ft extension cable compatible with the WCS-1\/2 moisture content sensor, ThinkGrow LED grow lights and smart light lifters. It has one male and one female end and can extend the distance between the WCS-1\/2 module and the sensor probe, or between ThinkGrow LED grow lights and the smart light lifter.\u003c\/p\u003e\n\n\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003eKey features\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eSeamless connection\u003c\/li\u003e\n  \u003cli\u003ePlug and play\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003ePackage contents\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003e1 x ECS-6 16 ft extension cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003eTechnical specifications\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003e32–122 °F, \u0026lt;90% RH\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Future of Grow","offers":[{"title":"Default Title","offer_id":55081629516101,"sku":"ECS-6","price":20.46,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0899\/2863\/0597\/files\/ecs-6-default-future-of-grow-8253364.webp?v=1753193849"},{"product_id":"tss-2","title":"TSS-2","description":"\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003eProduct description\u003c\/h2\u003e\n\n\u003cp\u003eThe TSS-2 extension cable is simply a 16 ft extension cable for use with WD-1 water detectors. It has a male and a female end and can extend the distance between 2 sensors (or the distance between the WD-1 module and the sensor).\u003c\/p\u003e\n\n\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003eKey features\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eSeamless connection with the water detector\u003c\/li\u003e\n  \u003cli\u003ePlug and play\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003ePackage contents\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003e1 x 16 ft extension cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003eTechnical specifications\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003e32–122 °F, \u0026lt;90% RH\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Future of Grow","offers":[{"title":"Default Title","offer_id":55081629548869,"sku":"TSS-2","price":15.81,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0899\/2863\/0597\/files\/tss-2-default-future-of-grow-1417306.webp?v=1753114658"},{"product_id":"dsc-2","title":"DSC-2","description":"\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003eProduct description\u003c\/h2\u003e\n\n\u003cp\u003eThe TrolMaster DSC-2 CO2 device\/control module makes it easy to connect and manage standard supplemental CO2 devices or CO2 extraction systems with the Hydro-X controller. Any CO2 equipment with a maximum capacity of 10 amps at 230 volts can be controlled by the DSC-2.\u003c\/p\u003e\n\n\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003eKey features\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCompatible with supplemental CO2 devices and extraction systems\u003c\/li\u003e\n  \u003cli\u003eDirect control via the Hydro-X system\u003c\/li\u003e\n  \u003cli\u003eSupports devices up to 10 A @ 230 V\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003ePackage contents\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003e1x DSC-2 module\u003c\/li\u003e\n  \u003cli\u003e1x Connection cable\u003c\/li\u003e\n  \u003cli\u003e1x Installation guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003eTechnical specifications\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eOperating voltage: 230 V\u003c\/li\u003e\n  \u003cli\u003eMaximum capacity: 10 A\u003c\/li\u003e\n  \u003cli\u003eCompatibility: Hydro-X system\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Future of Grow","offers":[{"title":"Default Title","offer_id":55081631220037,"sku":"DSC-2","price":84.63,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0899\/2863\/0597\/files\/c1c26a_6a85dc09cd81440caf3ec2765c1d668d_mv2_c3nycx.avif?v=1753114529"},{"product_id":"4rs-2","title":"4RS-2","description":"\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003eProduct description\u003c\/h2\u003e\n\u003cp\u003eThe TrolMaster 4RS-2 is a universal 4-socket module designed to connect directly to the Tent-X controller via RJ12 cables. It occupies 4 device module slots on the controller and offers 4 outputs configured by default from left to right: DST x1, DSH x1 and DSP x2. The power cable connects directly to the socket, making installation quick and simple. Each output can supply up to 15 A, allowing several devices to be powered at the same time.\u003c\/p\u003e\n\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003eKey features\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eUniversal 4-socket module\u003c\/li\u003e\n  \u003cli\u003eDirect connection to the Tent-X via RJ12\u003c\/li\u003e\n  \u003cli\u003eDefault output configuration: DST x1, DSH x1, DSP x2\u003c\/li\u003e\n  \u003cli\u003eQuick and easy installation\u003c\/li\u003e\n  \u003cli\u003e15 A capacity per output\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003ePackage contents\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1x 4RS-2 module\u003c\/li\u003e\n  \u003cli\u003e1x Power cable\u003c\/li\u003e\n  \u003cli\u003e1x RJ12 cable\u003c\/li\u003e\n  \u003cli\u003e1x Installation guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-family: 'Inter'; font-size: 2rem;\"\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eNumber of outputs: 4\u003c\/li\u003e\n  \u003cli\u003eMaximum capacity: 15 A per output\u003c\/li\u003e\n  \u003cli\u003eConnection: RJ12 cables (to Tent-X)\u003c\/li\u003e\n  \u003cli\u003eCompatibility: Tent-X controller\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Future of Grow","offers":[{"title":"Default Title","offer_id":55433279111493,"sku":"4RS-2","price":195.3,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0899\/2863\/0597\/files\/4rs-2-future-of-grow-4265856.webp?v=1755754272"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0899\/2863\/0597\/collections\/trolmaster-tent-x-controleur.webp?v=1784042995","url":"https:\/\/www.futureofgrow.com\/en\/collections\/tent-x.oembed","provider":"Future Of Grow","version":"1.0","type":"link"}